behind the scenes
Why Is Embroidery More Expensive Than Printing? A Look at Our Test Sweatshirts
Short answer: embroidery costs more than printing because every design has to be built by hand as a stitch file, tested on real fabric, and then stitched thread by thread, often thousands of stitches for one chest design. A print is pressed onto the fabric in one pass. The result is different too: embroidery doesn't crack, peel or fade in the wash.
The part most people never see is the testing. These are a few of our test sweatshirts. They're never sold. They're where a new design gets stitched for the first time, looked at closely, adjusted, and stitched again.
Our process: file, test, then your piece
Every embroidered piece we make goes through the same three steps:
- 1. We draw the stitch file. An embroidery machine can't read a picture. It reads a stitch file: thousands of instructions saying where the needle goes, in which direction, with which colour, and in what order. We build that file by hand.
- 2. We stitch a test. A file that looks perfect on screen can still stitch badly on real fabric, so it gets stitched on a test sweatshirt first and checked closely.
- 3. We stitch it for real. Only after the test looks right does the design go onto the actual piece.
That middle step is where much of the cost, and much of the quality, comes from.
What we look for on a test stitch-out
1. Does it look like the real thing? Fur, snow, water and leaves are all made from stitch direction. On the Great Smoky Mountains and Yellowstone tests you can see how each band of stitches is angled to read as a ridge, a cloud line or a tree. If a shape reads flat, we change the angles and stitch it again.

2. Is it too dense, or not dense enough? Too few stitches and the fabric shows through. Too many in a small area and the design turns stiff and heavy, like a patch glued onto the sweatshirt. We adjust density until the embroidery covers well but still moves with the fleece.
3. Do the shapes still line up? Fabric pulls in as it's stitched, so outlines can drift away from the fills they're meant to frame. Look at the square frame around our Venus test: on the left side the border has slipped away from the background, leaving a thin gap. That's exactly the kind of thing a test is for. We add "pull compensation" to the file so the border and the fill meet where they should, then stitch it again.

4. Is the small text readable? Lettering like "The Rhododendron State" or "National Park" is only a few millimetres tall. On the test we check that every letter is clean and doesn't blur into the fleece. If not, we adjust the font, size or stitch type.

5. Are the colours right on this fabric? The same thread looks different on white and on navy. A bright gold that sings on navy can look washed out on white. Testing on both tells us whether a design needs a different thread colour per sweatshirt colour.
Every fabric stitches differently
A design that works on one fabric doesn't automatically work on another:
- Sweatshirt fleece is thick and stretchy. Stitches can sink into the pile and the knit can pull, so designs need firm backing and careful density.
- Caps are stiff and curved. The design has to be stitched from the centre outward and kept smaller, or it distorts around the curve.
- Patches are stitched on flat, stable twill, so they hold fine detail best.
That's why the same artwork can need a separate stitch file for a sweatshirt, a cap and a patch, and why each version gets its own test.
Why the test sweatshirts look so messy
If you look closely you'll notice loose threads running between letters, and some designs stitched upside down. That's on purpose:
- We don't trim test pieces. Those long threads are "jumps" between parts of the design. On finished pieces they're trimmed; on tests we leave them so we can see the stitching order.
- We fill every inch. One sweatshirt can hold six or seven test designs, stitched in whatever direction fits the hoop. It saves fabric and lets us compare designs side by side.

How many tests does one design take?
It depends on the design. Some come out right on the very first stitch-out. Others, usually the ones with fine detail, layered colours or small lettering, take two or three rounds of adjusting and re-stitching.
Custom designs are always tested. When you send us your own photo or artwork, it's a brand-new file that has never been stitched before. So every custom design gets a test stitch-out first, before it goes onto your piece.
A tested design can still vary a little
Testing removes the problems that come from the file. It can't make every sweatshirt identical. Each garment stretches a little differently, and each one is hooped by hand, so the exact position or alignment of a design can vary slightly from one piece to the next. That's part of real embroidery rather than a print.
If your piece arrives with a stitching fault, or wrong or damaged, email us within 7 days of delivery with your order number and a photo. We'll remake it or give you a full refund. See our refund policy.
See the finished versions
Some of the designs from these tests, now finished:
- Great Smoky Mountains Embroidered Sweater
- Kilimanjaro Embroidered Sweatshirt
- West Virginia Rhododendron Embroidered Sweatshirt
- Mt. Rainier Embroidered Sweater
- Mount Hood Embroidered Sweater
- Bran Castle (Romania) Embroidered Patch
- Yellowstone Embroidered Patch
Have a design or a photo of your own in mind? Start a custom piece. It goes through the same file, test, stitch process.
New guides & gift ideas, now and then
Patch guides, pet portrait stories and studio news. No spam, unsubscribe anytime.


